· Automotive Industry -- Engine: Solutions for Injections and Valves

A complete line of products dedicated to process control, in-line and off-line quality check of every type of injection systems and valves

• Diesel injection systems
• Gasoline injection systems
• LPG and natural gas injection systems

Depending on the specific type of injection system, different components can be inspected, such as:

• Injection nozzles
• Injection valves and actuators
• Injection pumps
• Rails

The typical applications for injection are designed to be totally integrated with the production process.

• Static pneumatic gauges for ID and OD quality check
• M39S gauges for the scanning inspection of bores and shafts
• Special M39S gauges for roundness and straightness inspection of the guide diameter of the bore or the shaft
• Match grinding applications, predisposed for manual loading or fully integrated in automatic loading systems, with pre-process measurement of the finished bore, in-process measurement of the shaft during the grinding process and post-process evaluation of the matching clearance
• Match honing applications, predisposed for manual loading or fully integrated in automatic loading systems, with pre-process measurement of the finished shaft and post-process measurement of the bore during the honing process with evaluation of the matching clearance
• Manual or automatic gauges for class selection and for selective assembly
• Gauges for the inspection of the conical seat angle on injection nozzles and needles
• Measurement of the conical seat run-out in respect to the guide diameter on injection nozzles and needles
• Measurement of the conical seat depth
• Gauges for Lift measurement on the assembled components, for injectors and injection valves
• Applications for seat distance measurement and Lift selective assembly
• Flexible optical gauges for the inspection of the external profile of nozzles, needles and pumps
• Crack detection and hardness verification on stem, tip and valve seating
• Leak testing applications with air pressure decay method for back-leak measurement on the assembled injectors and valves
• Leak testing applications with Helium in vacuum chamber on assembled pumps and rails
• Leak testing applications with Helium sniffing of the assembled injection and rail groups into the engine