Leak Flow Rate Test Module, Direct Measure with Flow Sensor

TM3PQ

TM3PQ is a pneumatic module designed for direct flow measurement for leak, flow testing, on automated systems and turntables. Its small sizes allow a really close installation to the testing product, this helps to reduce times and enhances sensitivity.

DESCRIPTION
BENEFITS
TECH SPECS
Contact us

DESCRIPTION

TM3PQ is an instrument for leak tests with direct measure of the flow rate and for the volume control of the tested product.

PERFORMANCE

Delta TM3PQ is a pneumatic module with direct flow measurement for leak, flow testing.
The instrument directly measures pressure and flow rate through the product being tested (filters, taps, valves, ...). Testing times below 1 second can be reached for leak or flow rate tests on small volumes. It is available the dislocated pressure reading on the tested product.

TM3PQ can measure the leak rate by using an internal volume, and also control the volume of the tested product.

CONNECTIVITY

TM3PQ has digital I/O interfaces for PLC connection, USB/RS485 for programming and for data collection, a software to collect and manage the tests data for PC.

This instrument can be connected and controlled by every PLC and interfaced to HMI terminal which is provided with serial lines, USB host and Ethernet interface.

The software manager permits to collect and manage tests data, to set up the parameters, programming and do SPC analysis of tests data.

BENEFITS

Flow measurement: 25 cm³/min
Resolution: up to 0.01 cm³/min
Full scale pression up to 6 bar
Resolution: up to 0.1 Pa
Units of measure: cm³/min; cm³/h
Up to 300 testing tables
Digital I/O interfaces for PLC connection
USB/RS485 for programming and for data collection
HMI operator terminal available: 4.3” colour touch screen, with its own free software, that can handle up to 8 TM3 modules.
HMI fully Interfaceable: USB – Serial lines RS485/232 – Ethernet
Software Manager, dedicated for TM3 modules management data storage and statistical process, is available.
External automations and devices control: Staubli connector – HMI terminal – vacuum generator – valve for volume control – pressure regulator – printer, barcode and QRcode reader

TECH SPECS

SPECIFICATIONS
Power supply	24 Vdc – 1 A max
Pressure regulator	External, manual or electronic
Indicators	4 LEDs: two yellow (test phases), green (passed), red (failed)
Programmable parameters	Up to 300 testing tables, general testing parameters
Staubli® Connector	Available on external connection for leak masters (option)
Housing	Unpainted aluminium
Dimensions (HxWxD) and weight	103 x 80 x 200 mm
Weight	2,00 kg