T18 - TS30: TOUCH PROBES FOR TOOL SETTING
TOUCH PROBES FOR TOOL SETTING ON MACHINING CENTERS AND MILLING MACHINES
| PRODUCT | T18, TS30 and OTS30 |
| APPLICATION | touch probes for tool setting |
| MACHINE | machining centers, milling machines |
| PURPOSE | tool setting (tool breakage detection, tool wear detection, tool integrity, thermal drift compensation, ...) |
| TECHNOLOGY | hard wired transmission, optical infrared transmission, touch probe |
High
performance MIDA touch probes for tool setting on CNC machining centers
and milling machines. Reduced scrap, shorter cycle and set-up times and
improved product quality are just some of the benefits to be gained.
Outstanding performance
New MIDA probes offer good repeatability (2sigma < 1 µm) to meet the most demanding measurement applications.
Rugged and reliable
New
MIDA probes have been developed to withstand the harshest operating
conditions, having been designed and tested to work over many millions
cycles. Insensitive to rapid machine acceleration and vibration, new
MIDA probes offer excellent protection against high-pressure coolant
and chips.
Available versions
MIDA probes for tool checking are available in two styles:
- T18
is a compact touch probe for tool setting applications on NC lathes and
machining centers. All probes can be hard wired to the machine tool CNC
by using the E32R Interface unit for applications that does not require wireless touch signal transmission.
It can be used for:- tool breakage detection
- tool offset determination
- tool wear compensation
- tool breakage detection
- tool offset determination
- tool wear compensation
Download
| Brochure | Instruction Manual | User's Manual | |
| English |
T18 (338,29 KB) TS30 (360,85 KB) software (1,37 MB) |
T18 (330,24 KB) |
|
| Italian |
T18 (335,43 KB) TS30 (369,00 KB) software (1,37 MB) |
T18 (302,81 KB) |
|
| German |
T18 (327,46 KB) TS30 (362,50 KB) software (2,30 MB) |
T18 (312,17 KB) |
|
| French |
T18 (350,41 KB) TS30 (373,09 KB) software (2,27 MB) |
T18 (393,33 KB) |
|
| Spanish |
T18 (339,38 KB) TS30 (358,43 KB) software (2,27 MB) |
T18 (392,83 KB) |
|
| Czech |
T18 (360,38 KB) TS30 (398,87 KB) |
||
| Japanese |
T18 (557,57 KB) TS30 (371,21 KB) |
||
| Simplified Chinese |
T18 (612,50 KB) TS30 (565,33 KB) |
||
| multilanguage (Eng Ger Ita Fre Spa) |
(8,90 MB) TS30 (468,11 KB) OTS30 (1,68 MB) |
OTS30 (1,06 MB) |
|
| Traditional Chinese |
TS30 (1,19 MB) |
You may click here to download Adobe® Reader®

Enlarge the image
