Products

 

RED CROWN2™

LVDT, HBT, USB AND DIGITIZED NEW PENCIL PROBE LINE

The Red Crown2™. The NEW generation of pencil probes developed by MARPOSS, to provide quality measurement devices in the workshop.

Two model types are available with industry standard 8 mm dia. bodies.

  • Standard (with gaiter)
  • Soft Touch  (without gaiter).
This new generation of pencil probes, offers three types of output for today's gauging requirements and is the easiest way to PLUG & GAUGE. Choose from the ANALOGUE version RED CROWN2™, the  DIGITIZED version DIGI CROWN2™ (used in combination with DIGI NET) and RED CROWN2™ USB with an integrated interface embedded in the USB connector.

 

ANALOGUE transducer output

A comprehensive family of probes, available in standard (with gaiter) and soft touch (without gaiter) configuration.

  • Marposs compatibility:
    These pencil probes are supplied to connect to Marposs gauging products. A choice of 64 models, covering  measuring ranges from ± 0,5 mm to ± 10 mm with full-bridge (LVDT) or half-bridge (HBT) transducer designs, meets most workshop requirements. Already calibrated, they are easily connected to any TESTAR electronic display units such as E18, E4, E4N, Quick Read™ Microcolumn; Merlin, Nemo or through the data acquisition systems  like the Easy Box; Gage Box™ and Gage Pod™ to the E9066s™ Industrial PC family.
  •  

  • Compatible line:
    These pencil probes are available to connect to other end user analogue interfaces. A comprehensive list of probes covering measuring ranges from ± 0,5 mm to ± 10 mm with appropriate electrical connector and calibrated to comply with your existing electronic display unit is available.
  •  

  • Unplugged line:
    The 64 standard models of the basic line can also be provided without a connector. Based on established electrical characteristics supplied with each probe the user can add the necessary connector and perform the appropriate calibration to the electronics in use.

 

DIGITIZED transducer output

A comprehensive family of probes, available in standard (with gaiter) and soft touch (without gaiter) configuration.

  • DIGITIZED transducer for Digi Crown Network:
    These pencil probes are supplied to connect to the Marposs DigiNet system. A choice of 26 Digi Crown2™ models, are available in measuring ranges from ± 0,5 mm to ± 10 mm. Each pencil probe is supplied with dedicated calibration to digitalize the signal and linearize the error. The probes can be used in combination with proprietary Marposs interfaces, the DigiNet system or the Gage Pod™.
    Digi Crown Net is a modular system that can accept not only Digi Crown2™ pencil probes, but also other sensors available on the Market and produced by third parties, like incremental sensors, analogue output sensors (voltage or current type). The Net can be connected via RS232 or USB interface to any industrial or commercial computer and  various  PLCs, in addition to the Marposs display systems such as Merlin, Nemo and E9066™ Industrial PC family.
  •  

  • DIGITIZED transducer with integrated USB:
    These pencil probes are supplied to connect to any device with a USB computer socket. With 24  models being introduced these NEW probes, Red Crown2™ USB, are available in measuring ranges from ± 0,5 mm to ± 10 mm. Each pencil probe is supplied with dedicated calibration to digitalize the signal and linearize the error. The probes can be used in combination with any USB HOST device, with driver software included, for all end users, or any Marposs interface as Merlin, Nemo and E9066™ Industrial PC family. This product offers the ultimate and easiest way to PLUG & GAUGE.


Reliability and durability are assured in all models through innovative design, the use of the latest materials and high precision manufacturing techniques, together with accurate testing procedures (MCBF = 14 Million cycles). Developed using TESTAR' global extensive experience in the measurement & quality control sectors of high tech industries. Red Crown™ pencil probes assure precision measurements, delivering results below one micron, and contributing to the quality of your measurement data.

Red Crown2™ product line offers:

  • Comprehensive product range
  • High quality and precision
  • Wide choice of interfacing
  • Competitive prices
  • Short delivery
  • Durability

RED CROWN™ PENCIL PROBES - THE LOGICAL CHOICE TO GAUGE YOUR PART

 


FOR TECHNICAL SPECIFICATIONS AND ORDER CODES, SEE ATTACHED .PDF PRODUCT BROCHURE.

This equipment is used along with Quick Read or E4N or E9066 electronic units.

Click here to download technical drawings in pdf, stp and dwg format

VIDEO

video
TOP


Contact us for more info
Tell a friend
TAGS:

pencil probe