M110 PROFILE

AUTOMATIC MEASURING MACHINE FOR CAM PROFILE INSPECTION

RELIABLE, PRECISE, FAST
Rugged enough to be used in a workshop environment.
Can be integrated into production lines for inter-operational and final inspection. Reliable and accurate, designed and built using the most advanced engineering methods.
Due to a combination of multiprocessor electronics provided with dedicated algorithms, repeatability and accuracy are guaranteed comparable to those obtained in Metrological Laboratory.
Capable of maintaining reduced cycle times and quality control of an entire production run.
Optional functions include part marking and part segregation.

This equipment is used along with an E9066N Flat Panel electronic unit.

Machine is provided with a "feet-to-floor" structure and can straddle an automatic conveyor.
Provided with a linear elevator to pick components up from existing or Marposs provided automation.
Parts can be referred by centers or by a 3-jaw chuck, depending on the machining process.
Automatic mastering feature is provided. Masters for calibration and gauge station set-up are housed in the back of the machine in a protected area.
Measuring station, automatically retoolable for a family of parts, envisages integration of the Marposs measuring cells with linear and angular encoders.

Typical measurements performed on Cam Lobs include :

• Radius, T.I.R. and Concentricity of the Base Circle
• Profile, Velocity and Acceleration of Ramp and Nose
• Angular Phase and Taper

Typical measurements performed on Main Journals include :

• Diameter, Roundness, Taper, Straightness, Concentricity, T.I.R.

Chatter evaluations can be performed on both Cam Lobes and Main Journals.

	Brochure
English	(1,32 MB)
Italian	(2,19 MB)
German	(1,32 MB)

You may click here to download Adobe® Reader®