arrow-left-2arrow-left-3arrow-left-4arrow-leftchronodiggdown-arrow--lineardown-arrowearthfacebookfacebook_ (2)facebook_forward-arrowforwardgooglehomeico-downloadico-linkindustries--1industries--10industries--11industries--2industries--3industries--4industries--5industries--6industries--7industries--8industries--9linkedinmailmarkernewspaperpadlockpage-arrow-leftpage-arrow-rightpage-listpencilpinterestplay-buttonprintersearchsocial-diggsocial-facebooksocial-googlesocial-instagramsocial-linkedinsocial-pinterestsocial-twittersocial-youtubestartwittertwitter_user

Reconfigurable Gauging Bench for Bottles

Semi-automatic gauging bench, based on contact technology (linear displacement sensors), suitable for measuring round bottles and  easily reconfigurable for different articles. The part is manually loaded/unloaded on the bench and the measuring cycle is fully automatic.
Reconfigurable Gauging Bench for Bottles
ОПИСАНИЕ
It is composed of:
• a mechanical system, to refer and rotate the bottle, with a motorized rotating plate and an idle tailstock
• one or more measuring sections, with Red Crown 2™ linear sensors, that can be quickly vertically repositioned and arranged for bottles having different external diameters
• a Gage Pod™ data acquisition system
• an E9066™ Industrial PC with Quick SPC™ software
• a push-button box for cycle management and emergency button.
 
It can be used, at the cold end, in the QC lab or near the manufacturing lines,  to measure the following characteristics:
• external diameters on neck and body
• straightness of the generatrix, on the body, in the labelling area
ПРЕИМУЩЕСТВА
  • Cost effective solution
  • Accuracy (using Marposs Red Crown 2™ displacement sensor)
  • Easy reconfigurable for bottles having different dimensions
ТЕХНИЧЕСКИЕ ПАРАМЕТРЫ
Dimensions of the measurable bottles

Total height = 200-345 mm

External diameter = 50-120 mm

Inside mouth diameter (to insert the idle tailstock) = 16-28 mm

Measurements

External diameter on body and neck

Generatrix straightness on the body in the labelling area

 

Cycle time About 15 sec. including part loading/unloading
Repeatability

≤10% of the tolerance

Data output .csv or .dfq (QDAS®)

 

Видео
Загрузить

БУКЛЕТЫ И РУКОВОДСТВА

Буклет
Английский (467.80kB)

Запросить информацию

Укажите ваше имя
Укажите вашу фамилию
Укажите наименование компании
Укажите вашу электронную почту

Чтобы сообщение попало непосредственно в профильное подразделение, рекомендуем выбрать область из прилагаемого списка:

Укажите ваше сообщение

Перед отправкой формы следует внимательно прочитать ИНФОРМАЦИОННОЕ СООБЩЕНИЕ в отношении обработки личных данных в соответствии с Регламентом EU 2016/679.

Пожалуйста, дайте согласие с политикой конфиденциальности
Top Контакты
Закрыть
Закрыть