M18
MEASURING PLUG FOR TWO DIAMETERS AND TAPER ON TRANSFER LINES
Marposs M18 plug is:
- designed to check two coaxial internal diameters.
- utilized after turning and grinding operations on transfer machines, special purpose machines and post-process gauging stations.
- typical for the measurement of valve seat and valve guide diameters of the cylinder head.
Measurements are performed by use of four Marposs measuring cells, each provided with one LVDT transducer.
The plug uses a body with fixed nosepiece. In order to protect it from potential collision due to part mis-positioning or part overstock conditions, the plug requires mounting to rigid recoiling devices.
The plug is provided with cleaning air nozzles in the diameter no.1 section (the air inlet is always at 180° with respect to the junction box).
It can be connected to E9066N electronic unit for complex applications or applications for which statistical analysis is required and to P7 family electronic units for simple applications.
Side-by-side assembled on the machine, the gauge plugs can measure bores having minimum center distance of 47 mm.
This equipment is used along with an industrial PC E9066N Flat Panel .
