4-CHANNEL DATA ACQUISITION SYSTEM
Easy Box™ is a line of interface boxes for easy and economical management via USB port of inductive and incremental transducers, air gauges, Digimatic and serial gauges, I/O signals, thermocouples. It can be used with the MARPOSS compact gauge computer Merlin and Industrial PC E9066, or with any commercial Personal Computer.
- U1Air with adjustable sensitivity and zeroing nozzles to connect one pneumatic gauge
- U4F to connect up to 4 MARPOSS standard full-bridge (LVDT) transducers
- U4F-HR to connect up to 4 MARPOSS standard full-bridge (LVDT) transducers, for applications requiring a very high measurement resolution
- U4H to connect up to 4 MARPOSS standard half-bridge transducers (HBT)
- U4T to connect up to 4 half-bridge transducers (HBT) compatible with amplifiers of TESA
- U4E to connect up to three incremental transducers such as linear probes, linear and rotary encoders, etc.
- U4D to connect up to 4 Digimatic gauges (such as Mitutoyo calipers, digital dial gauges, etc.)
- U4S to connect up to 4 gauges with RS232 output (cable shall feature Cannon 9-pin female connector)
- U4TP-E, U4TP-J, U4TP-K to connect up to four thermocouples type E, J, K respectively
- U8I/O managing 8 Input/Output powered 24Vdc.
Both Easy Box™ power supply and transmission to a PC of the measuring values of the connected transducers are realized through the USB port. A single cable is therefore required for both functions. Some models may require an external power feed according to the type of connected transducer.
The Easy Box™ is suitable for static measurement acquisition or for continuous acquisition where the workpiece is rotated manually or automatically.
The Easy Box™ continuously provides to the PC (via USB port) the values of the sensors connected to the box. Whenever a data trigger is necessary, it can be made in the following way:
- With the external signal of a footswitchconnected to the Easy Box™
- With a data request from the host PC
- With the data button available on the Digimatic device (gauge data send button)
- MARPOSS DLL drivers library for Windows® operating systems, allowingto interface Easy Boxes with any Windows 98® (or higher release) compatible application program with minimum software programming skills.
- Easy AcquisitionTM software package for data acquisition on Excel® worksheets: an easy to operate software package to import data, program measurements and perform data collection into a convenient Excel spread sheet.
- Easy AcquisitionTM software package for data acquisition and SPC on Excel® worksheets: a complete and easy to operate software package to import data, program measurements, perform data collection and SPC analysis and reporting.
- Quick SPCTM process and quality control software for Windows®, asuite of software products designed to comply with any requirement ranging from simple measurement acquisition to complex gauging applications.
- E9066T - THIN PANEL INDUSTRIAL COMPUTER
- QUICK SPC - STATISTICAL PROCESS CONTROL (SPC) AND QUALITY CONTROL SOFTWARE
Driver Manual (2359 KB)
Easy Box for air gauges (537 KB)
hardware (4163 KB)
release 1.0 (5811 KB)
Easy Box for air gauges (533 KB)
release 1.0 (5793 KB)
Easy Box for air gauges (535 KB)
Easy Box for air gauges (529 KB)
Easy Box for air gauges (529 KB)
Easy Box for air gauges (691 KB)