MEASURING STATION FOR CAM PROFILE INSPECTION
RELIABLE, PRECISE, FAST
Rugged enough to be used in a workshop environment.
Can be integrated into production lines for inter-operational and final inspection. Reliable and accurate, designed and built using the most advanced engineering methods.
Due to a combination of multiprocessor electronics provided with dedicated algorithms, repeatability and accuracy are guaranteed comparable to those obtained in Metrological Laboratory.
Capable of maintaining reduced cycle times and quality control of an entire production run.
This equipment is used along with an industrial PC E9066N Flat Panel .
Station is provided with a "feet-to-floor" structure.
Part loading can be manual or by an automated gantry.
Parts can be referred by centers or by a 3-jaw chuck, depending on the machining process.
Mastering can be performed manually or automatically assisted by a gantry.Guarding shown in the photograph are not needed when safety is guaranteed by perimetral fencing.
Measuring station, manually retoolable for a family of parts, envisages the integration of the Marposs measuring cells with linear and angular encoders.
Typical measurements performed on Cam Lobes include :
- Radius, T.I.R. and Concentricity of the Base Circle
- Profile, Velocity and Acceleration of Ramp and Nose
- Angular Phase and Taper
- Diameter, Roundness, Taper, Straightness, Concentricity, T.I.R.